Materials Testing: FLEC emission cell
FLEC® - Field and Laboratory Emission Cell for materials emissions testing
As described in international standard methods (ENV 13419-2, ISO 16000-10, ASTM D7143-05, etc), the FLEC® provides an easy-to-use and relatively fast alternative to chambers for testing emissions from planar materials and coatings. Typical test times are only 1 hour per sample though 24 hours is required for full compliance with standard methods. The FLEC® can also be used for non-destructive field (on-site) tests of surface emissions.
Click FLEC® for further information.
For part numbers and pricing please contact your local Markes distributor or visit our on-line shop.
Relevant technical support publications from Markes International can be automatically downloded from this web site (registration required). Examples include:
-
-
TDTS 55 – Using the FLEC
® Cell to determine volatile organic emissions from indoor materials and products
-
TDTS 56 – TD-GC-MS analysis of VOCs for materials emissions testing
-
TDTS 70 – Materials emissions testing using the FLEC
® cell: testing recovery and sink effects
-
TDTS 71 – Summary of FLEC
® applications
-
TDTS 72 – Comparison of FLEC
® with conventional chambers for testing VOC emissions from materials summary of published data
Back to Materials Testing home page
FLEC® is a registered trademark of Chematec, Denmark. Markes International is proud to supply the FLEC® and associated accessories (pumps, air supply equipment, etc) around the world.